8" Lapidary Cabochon Cabbing Grinder

This Cabbing Grinder Machine with 1"stainless steel shafts and ball bearings,7pcs Aluminums Spacers and Flanges and locknut It also has a 3/4HP Thermal protected ball bearing motor, the Hood process by 304 stainless steel. We also can supply a adjustable drip water system with 8 shut off valves for each wheel. The shaft is tapped for a ¼-20 spin-on polish head at right ends and tapped for a 1/2" Aluminum lap or Diamond Facet Laps at left ends. Accepts silicon carbide or diamond wheels or rubber expandable drums.

Features:

1. Durable, direct drive 3/4HP, 1500 and 1800RPM motor

2. 220/240/110V optional

3. Independently controlled drip water cooling system

4. Stainless steel, removable, independent hood.

5. Rust free, easy to clean, drip pans can be set up for forward or rear drainage

6. Separate Mute submersible water pump

7. Water drainage system to eliminate constantly draining drip pans

8. Two Hood Splash Guard

9. Four Wheel Splash Guard

10. 2pcs Plastic Stone Boxes

11. One Waterproof Pinafore

12. One Hand Rest

13. A Couple Water pipe

14. One LED lamp

15. Motor noise is less than 62 db

16. 5/8"shafts and ball bearings With 1"alloy aluminum shaft sleeve, Versatile shaft which can accept a variety of 1" arbor wheels

17. Each One of 8"x1.5" 280,600,1200,3000 Grit Diamond Soft Grinding Wheels

18. One 8"x1.5" 80 ,220 Diamond Hard Grinding Wheel

19. One 8"x1/2" 360Grit Diamond Standard Faceting Lap

20. One 8" 14000 Diamond Prepolishing Pad